Online fluid monitoring




.Installation in all IFPM devices
AG2 can be installed directly into the control panel, all important parameters at a glance
The integration of the VS01 brings additional analogue indication of filter contamination
Device to interpret the electric signals coming from the VS1 and the WS02
Setting position reading via LED
Cold start indication via LED
Adjustable preasure peak rejection
Applications:
This combination enables you to monitor the saturation and contamination level of your oil continuously.
The WS01 in combination with the AG2 and the VS01 is applicable in all common hydraulic and lubricating systems.
Indication of the saturation level:
10-step LED – display “AG2″
00 – 60 % no free water
60 – 80 % small amounts of free water
80 – …..% free water present
Technical data:
Measuring range:	0…100% Saturation
Tolerance:	(MR 5…95% at 10..40°C): ± 2%
Additional error:	( > 40°C): 0,1%/K
Ambient temperature:	-40°C…+80°C
Output signal:	4…20 mA
Operating voltage:	12…30 V
Acceptable burden for 24 VDC:	600 Ohm
Supply voltage:	24 V DC ± 20 %
Periodic and random deviation:	< 10 %
Relay contacts:	2 x shutter
Umax:	240 V AC
Imax:	0,5 A
Pmax:	10 Watts
Temperature range:	0 – 70 °C
Protection class:	IP 53 (only front with clear screen)
Enclosure dimensions:	based on DIN 43700 (see figure below)