When you need to protect your hydraulic components, you have to use pressure line filters.

SERIES     ML – MNL

Application : Mounting in pressure lines with  threaded design.
Port size : up to G1
Working pressure : up to 160 bar   Flow rates : up to 450 I/min
Filtration Materials : interpor fleece or stainless steel wire mesh
User benefits :Economical , light weighted filter range
For low to medium pressure applications. Requires only minimal clearance during element change and therefore saves valuable space.

SERIES     HP 31 – 450

Application : Mounting in pressure lines with
threaded design.
Port size : up to G1 1/2, up to SAE 2″
Working pressure : up to 420 bar   -Flow rates : up to 1350 I/min
Filtration Materials -Paper , interpor fleece or stainless steel wire mesh
User benefits : In-Line or flange mounting possible with various different port and ∆P indicator options.
Very high flow rates with a single housing possible.

SERIES HP 170 – 1351

Application : Mounting in pressure lines with threaded design.
Port size : up to SAE 1 1/2″
Working pressure : up to 420 bar   –   Flow rates : up to 1350 I/min
Filtration Materials : Paper , interpor fleece or stainless steel wire mesh
User benefits : In-Line or flange mounting possible with various different port and ∆P indicator options.
Very high flow rates with a single housing possible.

SERIES   HPW

Application : Pressure filters for reversible Filtration, Mounting in pressure lines with
flange or threaded Mounting.
Port size : up to G1 1/2, up to flange DN 50 , Up to G 2
Working pressure : up to 315 bar  -  Flow rates : up to 400 I/min
Filtration Materials : Paper , interpor fleece or stainless steel wire mesh
User benefits : HPW filters are to be applied
Where the medium that should be filtered effect for both direction of the flow exists.

SERIES HPV – MDV

Application :   In -line Pressure filters with differential pressure ( cold start) valve.

Port size : HPV-up to G 1 1/2 , MDV -Up to G 3/4
Working pressure : HPV- 420 bar, MDV-200 bar
Flow rates :HPV up to 450 I/min, MDV up to 150 I/min
Filtration Materials : Paper , interpor fleece or stainless steel wire mesh
User benefits : Permanent supply of clean oil is guaranteed. If the element is clogged , change is forced, which means that no damage is possible to the downstream components.
Forced (third port ) return to the reservoir.

SERIES    MNU – HNU – HPU – HPP

Application : Mounting in pressure lines with Flange or manifold mounting.
Port size : DN 32
Working pressure : 160 bar , 315 bar Flow rates : HPP- up to 1350 I/min

Filtration Materials : Paper , interpor fleece or stainless steel wire mesh

User benefits : Simplified mounting, which saves Valuable space. Provides filtration directly
At the point needed. Prevents dirty fluid from passing downstream during the element change.

SERIES   HPF – HPX – HPY

Application : Mounting in pressure lines with manifold mounting.
Port size : up to DN 36
Working pressure : up to 315 bar   Flow rates : HPF up to 1350 I/min
Filtration Materials : Paper , interpor fleece or stainless steel wire mesh
User benefits : Simplified mounting, which
saves valuable space. Provides filtration
directly at the point needed .Prevents dirty fluid from passing downstream during the element change .